RSD is hosting a Ruud RD17 Inverter training. The course will provide a better understanding of how to properly install, service, and maintain Ruud's new inverter equipment. It will also cover the Econet Thermostat installation, setup, and use as a diagnostic tool. In addition, we will cover the new Ruud Bluetooth app and how it can be used in equipment setup and diagnostics.

RSD Redding
915 Industrial St. Suite 101
Redding, CA 96002

For more information contact:
Taylor Mason
(530) 222-0852
tmason@rsd.net

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD Santa Rosa
2920 Dutton Ave.
Santa Rosa, CA 95407

For more information contact:
Scott Iversen
(707) 585-1133

RSD is hosting a refrigerant transition A2L Low GWP Refrigerants overview training. The course will provide an introduction to low GWP refrigerants. It will also cover properties of R454B, R32 vs. R410A comparisons. In addition, we will cover refrigeration safety, proper installation, and service guidelines. There will be some discussions of product transition schedule and sell-throughs.

RSD Redding
915 Industrial St. Suite 101
Redding, CA 96002

For more information contact:
Taylor Mason
(530) 222-0852
tmason@rsd.net

Join us as we welcome a number of manufacturers, who will be present as we celebrate the opening of our new location. Come meet the people you may have only had the chance to talk on the phone with or e-mail. There will be a raffle with multiple prizes and BBQ lunch catered, so bring your appetite!

RSD Medford
1549 N. Central Ave.
Medford, OR 97501

For more information contact:
Steve Hauberg
(541) 734-4304

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD South San Francisco
285 Lawrence Ave.
South San Francisco, CA 94080

For more information contact:
Mike McCorkhill
(650) 737-7912

RSD is hosting a TXV metering devices training, the basics of superheat and subcooling, how to take measurements, and understand what they mean when diagnosing a unit. We will also cover Airflow trouble shooting to discuss airflow diagnostic issues, perform hands-on static pressure measurements using some of the basic tools for airflow. Technicians will walk away with a better understanding of TXV's superheat and subcooling.

RSD Redding
915 Industrial St. Suite 101
Redding, CA 96002

For more information contact:
Taylor Mason
(530) 222-0852
tmason@rsd.net

This course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing, and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

Register for this class

RSD is hosting a Veto Pro Pac Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. This is an opportunity to have any questions you may have answered about Veto Pro Pac products and observe a hands-on product demo.

RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112

For more information contact:
JD Moss
(408) 297-9453

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Lake Forest
26021 Atlantic Ocean Dr.
Lake Forest, CA 92630

For more information contact:
Greg Kobrak
(949) 301-4483
gkobrak@rsd.net

This course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing, and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

Register for this class

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Lake Forest
26021 Atlantic Ocean Dr.
Lake Forest, CA 92630

For more information contact:
Greg Kobrak
(949) 301-4483
gkobrak@rsd.net

This course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing, and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

Register for this class

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Lake Forest
26021 Atlantic Ocean Dr.
Lake Forest, CA 92630

For more information contact:
Greg Kobrak
(949) 301-4483
gkobrak@rsd.net

RSD is hosting a Nu-Calgon Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. You will also have the opportunity to learn about the differences between various coil cleaners and when to use each cleaner. Features and benefits of the Gallo-Gun and accessories. This is an opportunity to have any questions you may have answered about Nu-Calgon products.

RSD Ontario
1705 E. Francis St.
Ontario, CA 91761

For more information contact:
Julio Felix
(909) 930-5552

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD Boise
423 N. Mitchell St.
Boise, ID 83704

For more information contact:
Anthony Ramirez
(208) 378-9940

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD Ogden
1741 W. 2800 South
Ogden, UT 84401

For more information contact:
Rhett Summers
(801) 621-5960

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD Salt Lake City
250 W. Gregson Ave.
Salt Lake City, UT 84115

For more information contact:
Jesse Anderson
(801) 485-5000

State and Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers, and Refrigeration.

RSD Orem
1426 W. 130 South
Orem, UT 84058

For more information contact:
Ron Burrell
(801) 224-0797

RSD is hosting a Bosch Inverter Installation and Diagnostics technical training. Bosch instructors will be covering proper installation techniques to avoid any start-up issues and unit failures. Technicians will learn how to navigate through the user interface to set up and diagnose troubleshooting along with any maintenances. Technicians will receive service manuals and a quick start guide to assist them in the field.

RSD Stockton
2882 Teepee Dr.
Stockton, CA 95205

For more information contact:
Daniel Allison
(209) 462-7650

RSD is hosting a Bosch Inverter Installation and Diagnostics technical training. Bosch instructors will be covering proper installation techniques to avoid any start-up issues and unit failures. Technicians will learn how to navigate through the user interface to set up and diagnose troubleshooting along with any maintenances. Technicians will receive service manuals and a quick start guide to assist them in the field.

RSD Total Control Livermore
191 Wright Brothers Ave.
Livermore, CA 94551

For more information contact:
Rodney McClelland
(925) 674-1166
rmcclelland@rsd.net

RSD is hosting a Hoshizaki Service Seminar on their ice maker and refrigeration products. You will learn about the installation tips, maintenance, troubleshooting, water filtration, and the latest refrigeration updates. This is an opportunity to have any questions you may have answered about Hoshizaki products.

RSD Boise
423 N. Mitchell St.
Boise, ID 83704

For more information contact:
Anthony Ramirez
(208) 378-9940

RSD is hosting a Vacuum Pump tear down and performance clinic with J/B. This is a demonstration on testing for proper operation of a vacuum pump. You will learn how to both maintain and repair common vacuum pump and micron gauge problems to make them last and achieve years of peak performance. This training will also go over best practices for rapid evacuations of HVAC/R systems.

RSD Pomona
680 Union Ave.
Pomona, CA 91768

For more information contact:
Jacob Massey
(909) 397-0470

RSD is hosting a Resideo: Honeywell Home Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. And will also go over all things Honeywell Thermostat. This is an opportunity to have any questions you may have answered about Honeywell/Resideo products.

RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112

For more information contact:
JD Moss
(408) 297-9453

RSD is hosting a Fujitsu Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. Come check-out Fujitsu’s full product offering, learn about VRF Technology, and equipment applications suitable for your job requirements. This is an opportunity to have any questions you may have answered about Fujitsu products.

RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112

For more information contact:
JD Moss
(408) 297-9453

RSD is hosting a Glassfloss Filters Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. This is an opportunity to have any questions you may have answered about Glassfloss products.

RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112

For more information contact:
JD Moss
(408) 297-9453

RSD is hosting a Nu-Calgon Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. This is an opportunity to have any questions you may have answered about Nu-Calgon products.

RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112

For more information contact:
JD Moss
(408) 297-9453

RSD is hosting a Yellow Jacket Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. One in particular is Yellow Jacket’s new digital gauges. This is an opportunity to have any questions you may have answered about Yellow Jacket products.

RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112

For more information contact:
JD Moss
(408) 297-9453

RSD is hosting a Counter Day event with Belimo. Here you will learn about their latest innovations, including how they work & where you can find success with each product. This is an opportunity to have any questions you may have answered about Belimo products.

RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112

For more information contact:
JD Moss
(408) 297-9453

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

This is an Authorized Tridium Training Partner class. The goal of the 5-day, Niagara 4 Technical Certification Program is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement testifying to their ability. Class size limited to 12 to improve the learning experience. No laptop or software needed as all hardware and software required for this certification class will be provided.

Register for this class

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

This is an Authorized Tridium Training Partner class. The goal of the 5-day, Niagara 4 Intermediate Technical Certification Program is to educate students to the next level of technical experience, working more effectively and efficiently to design, engineer, and program a "cyber-secure" database using the Niagara 4 Workbench software.

Register for this class

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

This is an Authorized Tridium Training Partner class. The goal of the 5-day, Niagara 4 Technical Certification Program is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement testifying to their ability. Class size limited to 12 to improve the learning experience. No laptop or software needed as all hardware and software required for this certification class will be provided.

Register for this class

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

This class is designed for experienced Metasys or Facility Explorer technicians on how to optimize standard system control strategies for JCI BACnet field controllers. Learn how to optimize standard system control strategies, modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control. Class size limited to 8 to improve the learning experience.

Register for this class