RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Peoria
8952 W. Bloomfield Rd.
Peoria, AZ 85381

For more information contact:
Brian Hall
(480) 245-9660
[email protected]

Bring your vacuum pumps, micron gauges, and/or low loss charging hoses for a free inspection performance test and oil change. All vacuum pump brands are serviced. Micron gauges and hose service are limited to only J/B products. Free replacement of normal wear and tear items on J/B vacuum pumps. Also, come see and learn about the latest lineup of J/B vacuum and charging products.

RSD Thousand Palms
30571 Front St.
Thousand Palms, CA 92276

For more information contact:
Luis Gonzalez
(760) 343-1600

Bring your vacuum pumps, micron gauges, and/or low loss charging hoses for a free inspection performance test and oil change. All vacuum pump brands are serviced. Micron gauges and hose service are limited to only J/B products. Free replacement of normal wear and tear items on J/B vacuum pumps. Also, come see and learn about the latest lineup of J/B vacuum and charging products.

RSD Victorville
15360 Bonanza Rd.
Victorville, CA 92392

For more information contact:
Daniel Wilson
(760) 951-9872

Bring your vacuum pumps, micron gauges, and/or low loss charging hoses for a free inspection performance test and oil change. All vacuum pump brands are serviced. Micron gauges and hose service are limited to only J/B products. Free replacement of normal wear and tear items on J/B vacuum pumps. Also, come see and learn about the latest lineup of J/B vacuum and charging products.

RSD Pomona
680 Union Ave.
Pomona, CA 91768

For more information contact:
Jacob Massey
(909) 397-0470

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

Intensive 3-day training courses are offered so you know what you need to know to install, commission and service Johnson Control Metasys and Facility Explorer BACnet systems. Robert Vardell, a former field technician, controls engineer, Project Manager, Service Leader, small business owner, and Navy Chief, delivers a unique training experience for his students. Students come away with knowledge that is applicable to buildings you service, and relevant to your next project (Legacy N2 products are not included).

RSD Total Control Roseville
640 Commerce Dr. Suite 200
Roseville, CA 95678

For more information contact:
Jordan Quigley
(916) 369-0203
[email protected]

This class is designed for experienced Metasys or Facility Explorer technicians on how to optimize standard system control strategies for JCI BACnet field controllers. Learn how to optimize standard system control strategies, modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control. Class size limited to 8 to improve the learning experience.

Register for this class

Intensive 3-day training course to educate experienced Metasys or Facility Explorer technicians to an advanced level of expertise. Students will learn to efficiently optimize standard system control strategies for JCI BACnet field controllers, including modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control.

RSD Total Control Roseville
640 Commerce Dr. Suite 200
Roseville, CA 95678

For more information contact:
Jordan Quigley
(916) 369-0203
[email protected]

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Sparks
1650 Hymer Ave.
Sparks, NV 89431

For more information contact:
Brian Seelkoke
(775) 329-1067

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827

For more information contact:
Tom Hardy
(916) 369-0203
[email protected]

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827

For more information contact:
Tom Hardy
(916) 369-0203
[email protected]

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

Intensive 3-day training courses are offered so you know what you need to know to install, commission and service Johnson Control Metasys and Facility Explorer BACnet systems. Robert Vardell, a former field technician, controls engineer, Project Manager, Service Leader, small business owner, and Navy Chief, delivers a unique training experience for his students. Students come away with knowledge that is applicable to buildings you service, and relevant to your next project (Legacy N2 products are not included).

RSD Total Control Livermore
191 Wright Brothers Ave.
Livermore, CA 94551

For more information contact:
Drew Ginn
(408) 441-1811
[email protected]

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Concord
2551 Stanwell Dr. Suite A
Concord, CA 94520

For more information contact:
Dave Cobb
(925) 674-1166

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Total Control Livermore
191 Wright Brothers Ave.
Livermore, CA 94551

For more information contact:
Luke Bergerson
(408) 441-1811

This class is designed for experienced Metasys or Facility Explorer technicians on how to optimize standard system control strategies for JCI BACnet field controllers. Learn how to optimize standard system control strategies, modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control. Class size limited to 8 to improve the learning experience.

Register for this class

Intensive 3-day training course to educate experienced Metasys or Facility Explorer technicians to an advanced level of expertise. Students will learn to efficiently optimize standard system control strategies for JCI BACnet field controllers, including modules and logic blocks, global sequencer and multi-stage controller, pattern recognition modulation control, and pulse modulation adaptive control.

RSD Total Control Livermore
191 Wright Brothers Ave.
Livermore, CA 94551

For more information contact:
Drew Ginn
(408) 441-1811
[email protected]

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

DoubleTree South San Francisco:
275 South Airport Blvd.
South San Francisco, CA 94080

For more information contact:
John Serrato
(650) 737-7912
[email protected]

RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.

RSD Total Control Fresno
5920 E. Shields Ave. Suite 101
Fresno, CA 93727

For more information contact:
Deven Putnam
(559) 291-1000

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

Intensive 3-day training courses are offered so you know what you need to know to install, commission and service Johnson Control Metasys and Facility Explorer BACnet systems. Robert Vardell, a former field technician, controls engineer, Project Manager, Service Leader, small business owner, and Navy Chief, delivers a unique training experience for his students. Students come away with knowledge that is applicable to buildings you service, and relevant to your next project (Legacy N2 products are not included).

RSD Total Control Fresno
5920 E. Shields Ave. Suite 101
Fresno, CA 93727

For more information contact:
Deven Putnam
(559) 291-1000

This is an Authorized Tridium Training Partner class. The goal of the 5-day, Niagara 4 Technical Certification Program is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement testifying to their ability. Class size limited to 12 to improve the learning experience. No laptop or software needed as all hardware and software required for this certification class will be provided.

Register for this class

The goal of the 5-day, Niagara 4 Technical Certification Training is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement testifying to their ability.

Lake Forest training center: 26021 Atlantic Ocean Dr.
Lake Forest, CA 92630

For more information contact:
Greg Kobrak
(949) 301-4483
[email protected]

This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.

Register for this class

Intensive 3-day training courses are offered so you know what you need to know to install, commission and service Johnson Control Metasys and Facility Explorer BACnet systems. Robert Vardell, a former field technician, controls engineer, Project Manager, Service Leader, small business owner, and Navy Chief, delivers a unique training experience for his students. Students come away with knowledge that is applicable to buildings you service, and relevant to your next project (Legacy N2 products are not included).

Lake Forest training center: 26021 Atlantic Ocean Dr.
Lake Forest, CA 92630

For more information contact:
Greg Kobrak
(949) 301-4483
[email protected]